Samsung SmartCam 625 manual snh-v6431bn

Samsung smart cameras are not only best for photography but you can also use these advance cameras for security reasons. Yes, Samsung is also providing advance SmartCam devices so that you can install them at your home and then you can record all moments from your home.

In this article we are going to discuss manual for Samsung SmartCam 625 camera devices. Most of the settings for these devices are possible from Samsung SmartCam WiFi setup page so you must know how you will access the login page of your device.

How to Install New Samsung SmartCam 625 Camera Device?

1.     Install your Samsung SmartCam 625 to the wall where you need security. That means you will need to install the wall plate of your camera device and then you can connect your camera to your wall using screw drivers.

2.     When you are connecting or installing your Samsung SmartCam 625 to the wall, have a look that this camera can easily capture videos from required location. For that you can easily adjust the camera angle.

3.     After that connect power source for your camera device.wps configuration for samsung smart cam device

4.     Once the power LED for your device is solid green in color, you can start connecting your camera device to the network. Press the WPS Samsung SmartCam WiFi setup button from your device few seconds and then you can install Samsung SmartCam application to your device. 

5.     Scan the bar code of your device from the application and then you can add your new Samsung SmartCam 625 to Samsung account. Remember that you can only register a new Samsung security camera to your account using your mobile device.

Once your camera is installed and connected to your account, you can access your camera feeds and time by login to your account even from a remote location.     

What are Linksys smart wifi advance tools?

Linksys wifi router devices will give your some advance features but this is also true that you can manage your device settings from Linksys application. If you do not want to install Linksys application or if you do not have smart mobile device to use Linksys application then you can also use myrouter.local 192.168.1.1 Linksys smart tools to handle your device settings.

These Linksys smart wifi tools are used so that you can easily make wifi settings for your Linksys router from any remote location. Here we are explaining complete details for Linksys smart wifi tools. 

·        You can create Linksys smart wifi tools account free of cost and you do not need to pay any extra cost for this.

·        Once you crate Linksys smart wifi tools, you can make Linksys login from remote location and change your device settings.

Once you have Linksys smart wifi account, you can manage following settings for your Linksys router from any location.

1.     You can change your network name or SSID name.how to change login password for tenda router.

2.     If you want to change Linksys router login password for your device then you can change your password from this account. 

3.     If you are getting problems with wifi speed then you can change the channel settings for myrouter.local 192.168.1.1 using Linksys tools.

4.     If you want to enable or disable SSID or network name broadcast then you can use Linksys tools for this.

5.     Change network mode and security modes for Linksys routers from your Linksys smart wifi tools.

6.     Change Linksys router login user name and password for your device from the same window.

These are the benefits that you will get when you have working Linksys smart wifi tools account.  

Firmware updates process for Linksys

Update firmware for Linksys wifi router device and when you do not update firmware your router will go slow down for sure. Note that when you are updating your firmware, you must know about the accurate model number of your device. When you update wrong firmware for your device from Linksys setup page, this will make your device performance worst.

How to Update Linksys Router Firmware File?

When you want to get latest firmware for your device, here are the steps that you will follow.

1.     Access Linksys wifi router login page from your computer device.

2.     Fill Linksys login user name and password.

3.     Click on “Linksys Smart WiFi Firmware” button.

4.     Click on “Download” button and this will allow you to download firmware file of your Linksys router at your device.

5.     Now, you will need to select the hardware version of your device. Make sure that you selecting accurate hardware number of your device so that you can get accurate firmware file.

6.     After that extract the file and then click on “Update” button from Linksys setup. When you click on this button, select the firmware file.

7.     Wait for few seconds and then firmware file will be updated for Linksys router you are using.linksys ac1900 wifi router led details.

Once you follow these simple steps, firmware file will be updated for device that you are using. There is a trick when you are updating firmware for your device. When you update firmware of your Linksys wifi router device, make sure that power supply is not interrupted. Also, you must power cycle your device once the firmware file update is complete. Contact Linksys support team for help you can’t update firmware for your device easily.    

WPS settings for D-Link DAP-1320 Wi-Fi Range Extender

Setup your new D-Link DAP-1320 Wi-Fi Range Extender using WPS setup and you will not need to access any setup page of your extender device. WPS setup is used so that you can configure your device even without using setup CD. Later you can make http //dlinkap.local access and then you can change settings for your device very easily.

WPS Setup for D-Link DAP-1320 Wi-Fi Range Extender Device

1.     Plug in the power supply for your dlink wifi extender device.

2.     Wait for few seconds because this will help your devices to get power supply accurately. Change the admin password for your Dlink wifi router devices.

3.     Press WPS button from your router device that you are already using at your network.

4.     After that press WPS button from D-Link DAP-1320 Wi-Fi Range Extender device.

5.     When you press WPS button from both of your device, your devices will added to your network.

Your D-Link DAP-1320 Wi-Fi Range Extender device and router device are now connected to each other and they will easily extend your wifi network. When you need to change further settings for your device, you can access http //dlinkap. local page of your device and make changes for your device settings.

What if WPS Setup if Fail for Dlink Device?

If you find that your WPS configurations are not working then you can follow same steps again and again. You can also setup your new device manually and for that you can need setup CD. with each new device you will receive a new setup CD, this setup CD can be used to configure and setup a new device. you can request dlink support team to provide you remote help and they will help you to configure your device easily.    

Configure Guest Network for tplink

If you are organizing a party and you are inviting your friends to your home then you must configure guest network for your tplink devices. When you get guest network for your tplink router devices, you can easily allow wifi connections with some kind of limits. When you get login for 192.168.0.254 tp link web address, you can easily get guest network for tplink routers.

Steps to Configure Guest Network for TP-Link

1.     First login to tplink router setup page. From a computer device you can make login for your router setup window.

2.     From tplink dashboard you can change the settings for your devices.

3.     From tplink router dashboard select “Guest Network” window.

4.     Enable guest network for tplink router you are using.

5.     Fill a network name for your guests. All your guests will get access only to this network.

6.     If you want more wireless security for your data then you can change the security settings from there.

7.     Data packets can be encrypted easily using next settings. Encryption settings are possible using drop down window. Easily setup the static routing for the tplink devices

8.     You can change the access time for your devices. This access time is the maximum time limit for which you want to allow wifi access to your guests.

9.     Both 2.4 GHz and 5 GHz network settings will be possible from this window.

10.                      If you want to change the PSK password then you can choose a separate password for guest network. You will share this password to your guests. If you do not want to have password for guest network then let the password field remain blank.

These steps are used to guest network management for your tplink wifi router devices. Other kind of settings for tplink device can also be done using 192.168.0.254 tplink web address.