why assign the IP address to switch

As we know that the most numerous devices installed on the corporate network infrastructure, among this numerous device switch are one of them. www 192.168 o 1.1 admin It is also very fun and challenging to configure them. It is also very important to know how switch normally boots and load an operating system. Get the information regarding the wireless setting for the netgear wn2000rpt wifi extender.

Switch Boot Sequence (2.1.1.1)

1- At First, the switch loads a power-on-self-test program stored in ROM. After that, you have to POST checks the CPU subsystem.

2- Then the switch loads the boot loader software.

3- The boot loader performs low-level CPU initialization.

4- With the help of bootloader initializes you will be able to flash file system on the system board.

5- At last the bootloader locates and then automatically loads a default IOS operating system software image into memory after that the hand's control of the switch over to the IOS.

Recovering from a System Crash (2.1.1.2)

1- At first you have to Connect a console cable from the PC to the switch console port.

2- Then remove the Switch Power Cord.

3- Then you have to reconnect the power cord to the switch. And then press the switch for 15 seconds and then hold down the Mode button while the System LED is still flashing green.

4- If the flash is not blinking in green color then continuously press the switch.

5- The prompt appears in the terminal emulation software on the PC.

With the help of Boot Loader, you will be able to format the flash file system, reinstall the operating system software, and recover from a lost or forgotten password. There are several status LED indicator lights in Cisco Catalyst switches. A different model of switches has a different set of LED light.

samsung smart-cam 2 pack security cameras

He guys what's up! I hope all of you are doing absolutely fine. Nowadays security cameras become one article of the important thing in our day to days. Because nowadays the robbery is spreading like a virus. So we need to keep a real-time record in our house as well in our office. That's is why recently Samsung has launched their new smart-cam 2 pack security cameras. With the help of this camera, you can record each and everything what is going on in your house and in your office.

Now let us discuss where you should fix your security camera so that you can record each and every corner of your house as well as of your office. Get the information regarding the video monitoring option for the samsung smartcams.

1- At the front door of your house and office.

2- Inside your house and office.

3- If your home has some entry door on the back side then there also you must set this security camera.

This is the main part where you must set your security camera.

Specifications of smart-cam 2 pack security cameras

1- smart-cam 2 pack security cameras has TWO SNH-1011N value pack.

2- It also has Built-in IR LED Lamps for Night vision Monitor on PC, MAC, and smartphones.

3- Audio and Motion detection and notification Free and easy recording on YouTube.

4- With the help of Samsung smart camera app mac you can see the real-time record on your phone, what your child is doing in the home.

5- smart-cam 2 pack security cameras also has One-Push Setup in 30 seconds Built-in Mic and Speaker for Two way talk.

I hope that our services has pleased you. Still now if you have any query then comment down below in the comment section.

192.168.0.1 wireless setup for 5.3

You have to enter the web address as 192.168.1.1 or 192.168.0.1 wireless setup in the address bar menu of your browser and then press enter, this allows you access the router login page for your device.  After that, you need to enter the default username and password in the webpage of your router admin panel.  You can also customize the security option like WLAN Settings, DSL, PPPoE, WPS, MAC, AND DHCP Client, or the network management settings like LAN, WAN, DNS, or Proxy.

 How to setup router using 192.168.0.1

First of all, you need to connect the router to the PC.

After that, you need to connect your adapter and then turn on the Router and the computer.

Then, you have to open the web browser in your computer and then type the web address 192.168.0.1 wireless setup in the address bar menu and then press enter.

In the next step, you have to enter the default username and password for your device.  Please note that the default username and password for your device is the admin.

This will open the admin page for your device and now you can all the required settings for the usage.

 D-LINK Router Login Setup

The following are the steps below for the router setup login for the D-Link. 

First of all, you need to connect the D-Link router to your computer.

After that, you have to connect the adapter and then open the web browser and then type the web address as 192.168.0.1 in the address bar menu and then press enter.

In the next step, you have to enter the username and the password for your D-Link router in the administrator page.

First, you need to connect the Netgear router with your Personal computer. You may having problem in the wifi extender configuration that its network name is not detecting for that just follow this blog.

Then, you have to open the web browser and type the web address as 192.168.0.1 in the search bar and press enter. 

cisco linksys router login configuration step by step

This article covers the basic cisco linksys router login and configuration steps.  The various steps explicitly change the DNS settings in your router and allow you to use the Open DNS IP address.  You can setup your Linksys router either with the Cable internet Service or can be done manually by inserting the installation CD to configure your router settings.  It is recommended to use the Linksys Connect Software for your Linksys router and Linksys Smart Wi-Fi routers.  The Linksys smart Setup will guide you through the various steps involved in the process.  You have to contact your ISP for your internet connection type if you are not sure about it. From our blog, you can also check for the security tips for the router.

The following are the step-by-step instructions for cisco linksys router login

•             First of all, open the web browser on your PC and type the web address http://192.168.1.1 in the address bar menu and then press enter to start.  The IP address shown above is the default Linksys router IP address.

•             After that, you have to enter the network name and the password for your router.  The username is nothing (Blank) and in type, the password as password, in other words, left the username blank and the default password is password.  Press the ok button to proceed further.

•             In the static DNS 1 and Static DNS 2 fields, you have to type in Open DNS address.  You need to write down the DNS settings before moving on to Open DNS, this allows you to return to your old settings if in case you want to return to your old settings for any of the reasons.

•             Click on the Save Settings button to save the settings that you have made until now.  Please note that you have to flush your DNS resolver cache and web browser catches that allows you to ensure that your DNS settings will take place immediately.