How to Wish Ramzan Kareem 2019?

Prepare to send the best Happy Ramzan Kareem 2019 Greetings Wishes Messages 2019 in the most anticipated ninth Islamic month of Ramzan. You can send these Happy Ramzan Greeting Wishes to your family and companions. Muslims everywhere throughout the world commend this month with full commitment and Religious genuineness. Here are the reasons the Ramzan is important for all of us.

 Amid this month Muslims quick amid the day. The long stretch of Ramzan is more than fasting and self-commitment towards the love of Allah. May Allah give all satisfaction and achievement that you merit in the long stretch of Ramzan. Make certain to send these Happy Ramzan wishes Messages to your family and companions and have an extremely Happy Ramzan or Ramzan Kareem 2019 Mubarak.

Time of fasting:

Islam says that Ramzan is a standout amongst the most vital days for Muslims. This symbolizes the ninth month of the lunar date-book in Islam. This month is viewed as the time of fasting for some Muslims all around the globe.

Consistently, Muslims cease themselves from drinking, physical requirements and from eating too. It's the timeframe though Muslims sanctify in purging their spirits, apologize for their offenses, watch benevolence and dedicate their consideration towards Allah.

Amid Ramzan, you may see that Muslims welcome one another and utilize the Arabic articulation "Ramzan Kareem". What is Ramzan Kareem? It is in a general sense utilized as welcome among Muslims by saying,Ramzan Kareem. So, this is used to wish their related Muslims a blissful Ramzan. Essentially, you can express Ramzan Kareem when you have to wish your friend to have a liberal Ramzan.

Wishes:

God has once again brought Ramzan in our lives and we must take this opportunity to do lots of ASTAGHFAR. May God forgives us for all our sins.

I wish you and your family from deeps of my hearts a very happy Ramzan. Always remember me in your prayers.

Samsung SmartCam Wi-Fi Direct connection settings

everyone of us want to secure our location and for that we need to install security camera devices. When you need to setup these security cameras, you can easily do these using Samsung SmartCam devices. In this article, we are going to explain steps for making wifi direct settings for your SmartCam devices.

You will need to install mobile application to your mobile device so that you can proceed for these steps. If you have mobile application for your device, you can easily access Samsung SmartCam HD setup page for your application.

WiFi Connection Setup for Samsung SmartCam Device 

1.       First you have to install mobile application for setting up your Samsung SmartCam device. You can find this application from application store.

2.       There you will need to select “Create New Account” option.

3.       Read all the instructions and then click on “Start” option.

4.       You will need to fill your Samsung ID associated to your device. This ID can be found using the email address for your Samsung account. Check for these tips and tricks if you are having problems while using Samsung SmartCam device.

5.       Fill password for your device for two times.

6.       Fill all these details and then click on “Next” button.

7.       There you will find “Add Camera” option so that you can add a new camera device to your application. You can then access Samsung SmartCam HD setup page and manage the wireless settings for your device.

8.       Click on “Wireless Setup” tab.

9.       From the WiFi options, you will find available internet connections. You can select the wifi network for your camera and then you can access your camera settings from any remote location.

10.   Later, using the LED status for your camera devices, you can find the configurations for your devices. These status lights will also help you to make sure that you can easily manage the configurations for your devices.

These are the steps to configure wifi setup for your SmartCam devices.     

Linksys router for Xbox one

Linksys WRT32XB, a Wi-Fi gaming router is meant for the game freaks for whom consistent and fast internet connection is a must. Linksys WRT32XB has been designed for PlayStation players and to be specific; it created for the Microsoft Xbox users. Check out for the Linksys router setup with the help of the myrouter local web utility.

Linksys offers the WRT32XB as an Xbox-focused upgrade for last year’s WRT32X, which featured similar features and specs but is now optimized for Xbox users.

Using a combination of auto-detection, prioritization, and some killer hardware, the WRT32XB significantly reduces peak ping, vastly improves bandwidth and improves security.

Features:

1) MU-MIMO technology

With this technology, you can set the data limit for every device connected to your router. Long back, when the bandwidth was divided equally among the users, the one requiring, more bandwidth suffered, while the one requiring less had a surplus.

And to resolve this, cisco linksys router login use MU-MIMO technology that comes for the rescue. Gamers which use Xbox one require large bandwidth and hence extract more than the one who is just scrolling the newsfeed. The WRT32XB’s AC3200 MU-MIMO distributes data intelligently and consistently, making sure everyone gets a fair crack.

2) Frequency

Linksys WRT32XB is certified, in other words, FCC allows the devices to get connected at a lower frequency like 80 MHz so that the users get less traffic and a clear signal.

The new router is enabled with Tri-Stream160, tripling the channels that are available at lower frequencies. It will let you experience constant internet connection on your Xbox one and that too at a faster rate.

3) Auto Updating

The most prominent features of the WRT32XB it auto-updating. Since it is very uncommon to update your router manually, this router comes up with this feature.

When it comes to smartphones and Laptops, update notifications are taken seriously, but the router is not given many considerations. Linksys WRT32XB is therefore designed with no-human interference or permission for updates.

Why firmware update is required for router

Before understanding the requirement, let us know what firmware is. Just like your PC has an OS for, e.g., Windows or Linux, the OS running on your router is called firmware. The features, behavior, protection all are maintained by the firmware. Different devices have different versions of firmware, and their updates are regularly supported to improve the functionality of the firmware from your 192.168.1.1 admin log in.

Why is it required to update the firmware?

Following are the reasons to why is it necessary:

1) Features and Fixes

As told earlier, updates are released to improve any bug present in the current version and provide more functions related to security, accessibility, ease of use, etc. As the technology advances, more security provisions are built, and you can avail them all if you keep your firmware updated. Check for the procedure here that can help you in accessing your dlink router page.

2) Outdated versions

Some tools of the current firmware might get outdated after the arrival of its upgraded form. For example, encryption modules used by the firmware for security purposes are updated regularly to ensure security. And so it is necessary to update firmware often. 

3) Better Performance

Apart from features, the speed of the router also depends on the firmware. And an updated version is likely to have better speed, performance, etc. And with frequent updating of the firmware, the router lag behind the new boosts and speeds,  

4) Internet capability

Updating firmware is not always wanted but needed as well. Outdated versions of firmware might not be capable of Internet availability. And to solve this, you’ll have to look for updates from the manufacturer so that you can connect your device to the internet without any interruptions.

It is always recommended to check or asks for updates from the manufacturer of the router and not from any third party. The chances are that you might end up downloading malware or a version that is not supported by your router.

linksys router setup without the computer

In this article, we are going to discuss how to set up your Wi-Fi router without a computer. If you are having a problem with this issue, then you must read this article of 192.168 1.1 admin admin till the end. Go for the Linksys setup which is used for disabling the SSID or the network name settings.

If your computer has no CD drive or if you have lost the Setup CD of your Linksys router, then you can still install your Linksys Wi-Fi Router by downloading the Linksys Setup Software, you can download this software from the Linksys Support Site.  For doing this at first you need to connect your computer first to a network with an active Internet connection or directly to the modem.

How to setup your Linksys Router without Computer

•    At first, you have to go to the official site of the Linksys Router, then enter the model number of your product in the Search field and click on it.

•    After that click on the Download/Firmware button.

•    Now you have to select the hardware version of your device.

•    Then you have to Locate the Setup Software for your computer and click Download.

•    Now you have to Save the Setup Software and then select a location on your computer to save the file. 

•    Double-click the Linksys Connect button to setup file that you have downloaded.

•    Then you have to Click on the License Terms link to read the license terms and information.

•    You have to connect the existing Ethernet cable to the yellow Internet port of the router.  Click Next.

 •    The setup process will automatically generate a unique Router name and Password for your network. 

•    Then The setup will automatically identify your Internet connection type. 

•    Now You will see a confirmation window which is showing that you are now connected to the Internet.  Click OK to continue.

Netgear router VPN not working

A Virtual Private Network (VPN) is a connection which is used for the security purposes while using internet services. It provides a secure way for connecting private and public networks. When a router has the term VPN pass-through, it means that the device will support only one endpoint. Netgear routers support the VPN pass through and can work with modification. Sometimes one may get a localized problem when troubleshooting. There are many solutions for this with making necessary changes on 192.168 o 1.1 admin login.

What is 192.168 o 1.1 Admin Login?
192.168 o 1.1 admin loginis an IP address which is used by different routers as a gateway or as an access point. Many business firms will set up this as the routers admin access to configure their networks and routers. One can manage the following with the help of this,

·         Network Management

·          Security Options

·          IP QoS, WPS block, DNS, proxy, DSL, ADSL, MAC, LAN, WAN and WLAN settings.

The solution for Netgear router VPN not working|
There are many solutions when Netgear router’s VPN stops working. These are the solutions,
When the device supports NAT- T one can try turning it on. Understanding how a VPN software can be configured will help. For understanding the necessary one can even contact the network administrator. The latest router firmware update can also help. One can also follow these steps where VPN may be in need of ICMP packets, Here is the right way for restoring the lost password for Linksys smart devices.
One should log into the router by using these web addresses http://192.168.1.1, http://routerlogin.net, http://192.168.0.1, and http://routerlogin.com.
Type this in the page that you are directed to
Username: Admin
Password: Password
Then select the WAN Setup and click on the Advanced tab and navigate to Respond to ping on Internet Port. After making these changes apply it.

Samsung smart camera for tv

Samsung cameras are cheap and the easy to set up they only need Wifi and power you also place in pretty much around your office or home, in the order to get good picture you want to follow some rules to try to set your camera at biggest light source is behind some time you won't be able to do  this when trying to cover a whole house. Get the settings for the storage cameras as well as SD card for the Samsung SmartCam device.

In these case camera an angle to light, indoor camera  \]want some light or put light on sensor to keep camera effective at night, light might deter completely it catches but they cane around a lot of good footage. It is most useful Samsung smart camera app for pc to footage of intruder you cannot identify them, having a camera in more or less level height ensure that you will correct angle to watch someone.

Samsung smart camera app for pc Ones you got camera setup to enter the house in any place you don’t want protect, at footage to see visible are make any necessary adjustment. Samsung  camera work even in lower light conditions the privacy of shutter on top of the camera is good

Use gesture control with smart interaction:

Control your TV with single finger gesture easily change channels and volume levels or swipe through the smart hub to grab and select content.

Virtual mirror:

With a virtual mirror, you can view the live video feed of your own movement on the split screen using apps like fitness app you can see yourself while you work out or checking you are performing while exercises correctly to the Samsung TV camera it is very difficult to keep an eye on your personal fitness to keep yourself fit and healthy while watching TV.

why assign the IP address to switch

As we know that the most numerous devices installed on the corporate network infrastructure, among this numerous device switch are one of them. www 192.168 o 1.1 admin It is also very fun and challenging to configure them. It is also very important to know how switch normally boots and load an operating system. Get the information regarding the wireless setting for the netgear wn2000rpt wifi extender.

Switch Boot Sequence (2.1.1.1)

1- At First, the switch loads a power-on-self-test program stored in ROM. After that, you have to POST checks the CPU subsystem.

2- Then the switch loads the boot loader software.

3- The boot loader performs low-level CPU initialization.

4- With the help of bootloader initializes you will be able to flash file system on the system board.

5- At last the bootloader locates and then automatically loads a default IOS operating system software image into memory after that the hand's control of the switch over to the IOS.

Recovering from a System Crash (2.1.1.2)

1- At first you have to Connect a console cable from the PC to the switch console port.

2- Then remove the Switch Power Cord.

3- Then you have to reconnect the power cord to the switch. And then press the switch for 15 seconds and then hold down the Mode button while the System LED is still flashing green.

4- If the flash is not blinking in green color then continuously press the switch.

5- The prompt appears in the terminal emulation software on the PC.

With the help of Boot Loader, you will be able to format the flash file system, reinstall the operating system software, and recover from a lost or forgotten password. There are several status LED indicator lights in Cisco Catalyst switches. A different model of switches has a different set of LED light.

samsung smart-cam 2 pack security cameras

He guys what's up! I hope all of you are doing absolutely fine. Nowadays security cameras become one article of the important thing in our day to days. Because nowadays the robbery is spreading like a virus. So we need to keep a real-time record in our house as well in our office. That's is why recently Samsung has launched their new smart-cam 2 pack security cameras. With the help of this camera, you can record each and everything what is going on in your house and in your office.

Now let us discuss where you should fix your security camera so that you can record each and every corner of your house as well as of your office. Get the information regarding the video monitoring option for the samsung smartcams.

1- At the front door of your house and office.

2- Inside your house and office.

3- If your home has some entry door on the back side then there also you must set this security camera.

This is the main part where you must set your security camera.

Specifications of smart-cam 2 pack security cameras

1- smart-cam 2 pack security cameras has TWO SNH-1011N value pack.

2- It also has Built-in IR LED Lamps for Night vision Monitor on PC, MAC, and smartphones.

3- Audio and Motion detection and notification Free and easy recording on YouTube.

4- With the help of Samsung smart camera app mac you can see the real-time record on your phone, what your child is doing in the home.

5- smart-cam 2 pack security cameras also has One-Push Setup in 30 seconds Built-in Mic and Speaker for Two way talk.

I hope that our services has pleased you. Still now if you have any query then comment down below in the comment section.

192.168.0.1 wireless setup for 5.3

You have to enter the web address as 192.168.1.1 or 192.168.0.1 wireless setup in the address bar menu of your browser and then press enter, this allows you access the router login page for your device.  After that, you need to enter the default username and password in the webpage of your router admin panel.  You can also customize the security option like WLAN Settings, DSL, PPPoE, WPS, MAC, AND DHCP Client, or the network management settings like LAN, WAN, DNS, or Proxy.

 How to setup router using 192.168.0.1

First of all, you need to connect the router to the PC.

After that, you need to connect your adapter and then turn on the Router and the computer.

Then, you have to open the web browser in your computer and then type the web address 192.168.0.1 wireless setup in the address bar menu and then press enter.

In the next step, you have to enter the default username and password for your device.  Please note that the default username and password for your device is the admin.

This will open the admin page for your device and now you can all the required settings for the usage.

 D-LINK Router Login Setup

The following are the steps below for the router setup login for the D-Link. 

First of all, you need to connect the D-Link router to your computer.

After that, you have to connect the adapter and then open the web browser and then type the web address as 192.168.0.1 in the address bar menu and then press enter.

In the next step, you have to enter the username and the password for your D-Link router in the administrator page.

First, you need to connect the Netgear router with your Personal computer. You may having problem in the wifi extender configuration that its network name is not detecting for that just follow this blog.

Then, you have to open the web browser and type the web address as 192.168.0.1 in the search bar and press enter. 

cisco linksys router login configuration step by step

This article covers the basic cisco linksys router login and configuration steps.  The various steps explicitly change the DNS settings in your router and allow you to use the Open DNS IP address.  You can setup your Linksys router either with the Cable internet Service or can be done manually by inserting the installation CD to configure your router settings.  It is recommended to use the Linksys Connect Software for your Linksys router and Linksys Smart Wi-Fi routers.  The Linksys smart Setup will guide you through the various steps involved in the process.  You have to contact your ISP for your internet connection type if you are not sure about it. From our blog, you can also check for the security tips for the router.

The following are the step-by-step instructions for cisco linksys router login

•             First of all, open the web browser on your PC and type the web address http://192.168.1.1 in the address bar menu and then press enter to start.  The IP address shown above is the default Linksys router IP address.

•             After that, you have to enter the network name and the password for your router.  The username is nothing (Blank) and in type, the password as password, in other words, left the username blank and the default password is password.  Press the ok button to proceed further.

•             In the static DNS 1 and Static DNS 2 fields, you have to type in Open DNS address.  You need to write down the DNS settings before moving on to Open DNS, this allows you to return to your old settings if in case you want to return to your old settings for any of the reasons.

•             Click on the Save Settings button to save the settings that you have made until now.  Please note that you have to flush your DNS resolver cache and web browser catches that allows you to ensure that your DNS settings will take place immediately.