WPS settings for D-Link DAP-1320 Wi-Fi Range Extender

Setup your new D-Link DAP-1320 Wi-Fi Range Extender using WPS setup and you will not need to access any setup page of your extender device. WPS setup is used so that you can configure your device even without using setup CD. Later you can make http //dlinkap.local access and then you can change settings for your device very easily.

WPS Setup for D-Link DAP-1320 Wi-Fi Range Extender Device

1.     Plug in the power supply for your dlink wifi extender device.

2.     Wait for few seconds because this will help your devices to get power supply accurately. Change the admin password for your Dlink wifi router devices.

3.     Press WPS button from your router device that you are already using at your network.

4.     After that press WPS button from D-Link DAP-1320 Wi-Fi Range Extender device.

5.     When you press WPS button from both of your device, your devices will added to your network.

Your D-Link DAP-1320 Wi-Fi Range Extender device and router device are now connected to each other and they will easily extend your wifi network. When you need to change further settings for your device, you can access http //dlinkap. local page of your device and make changes for your device settings.

What if WPS Setup if Fail for Dlink Device?

If you find that your WPS configurations are not working then you can follow same steps again and again. You can also setup your new device manually and for that you can need setup CD. with each new device you will receive a new setup CD, this setup CD can be used to configure and setup a new device. you can request dlink support team to provide you remote help and they will help you to configure your device easily.    

Configure Guest Network for tplink

If you are organizing a party and you are inviting your friends to your home then you must configure guest network for your tplink devices. When you get guest network for your tplink router devices, you can easily allow wifi connections with some kind of limits. When you get login for 192.168.0.254 tp link web address, you can easily get guest network for tplink routers.

Steps to Configure Guest Network for TP-Link

1.     First login to tplink router setup page. From a computer device you can make login for your router setup window.

2.     From tplink dashboard you can change the settings for your devices.

3.     From tplink router dashboard select “Guest Network” window.

4.     Enable guest network for tplink router you are using.

5.     Fill a network name for your guests. All your guests will get access only to this network.

6.     If you want more wireless security for your data then you can change the security settings from there.

7.     Data packets can be encrypted easily using next settings. Encryption settings are possible using drop down window. Easily setup the static routing for the tplink devices

8.     You can change the access time for your devices. This access time is the maximum time limit for which you want to allow wifi access to your guests.

9.     Both 2.4 GHz and 5 GHz network settings will be possible from this window.

10.                      If you want to change the PSK password then you can choose a separate password for guest network. You will share this password to your guests. If you do not want to have password for guest network then let the password field remain blank.

These steps are used to guest network management for your tplink wifi router devices. Other kind of settings for tplink device can also be done using 192.168.0.254 tplink web address.      

Parental Controls Tool for Linksys Smart Wi-Fi

Parental controls for Linksys devices will allow you to block internet for some specific devices or block interne for a specific time of the day. Actually, parental control settings are possible for most of the routers and wifi extenders that you can find but in this article we are particularly going to talk about myrouter local/signin Linksys devices.

When you need to get these parental control settings for any Linksys device you must know about the IP address or MAC address of all computer devices that are connected to Linksys wifi access. You can find MAC address of these devices from the LAN card of device. Learn the procedure for assigning the IP address to your Linksys account.

Here are Steps to Configure Advance Parental Controls for Linksys Smart WiFi Routers

1.     From any web browser access Linksys smart wifi page. When you have Linksys devices, you can configure and maintain your Linksys devices using free Linksys smart wifi account.

2.     Fill myrouter local/signin in address bar if you do not have Linksys smart wifi account.

3.     After that type Linksys login user name and password.

4.     Find “Smart WiFi Tools” button.

5.     There you find all settings that are possible for Linksys router. You have to click on “Parental Controls” button.

6.     Enable parental controls for your Linksys devices.

7.     You will find a chart of the devices that are connected to your Linksys wifi router device. if you want, you can select any device for which you want to make the settings. This is the place where you must know about the MAC address of the devices.

8.     After that you can specify the type of restrictions that you want to make for your router devices. If you want to block wifi access for whole day then it is also possible from this page.

Click on “Save” button and parental controls are now done for your Linksys router device.     

ADSL Settings for Netgear Nighthawk Router

If you are using Netgear routers and you need to configure advance settings for these devices then you will need to access routerlogin net start 192.168.1.1 for this. This is also true that not all Netgear users need these advance settings but it if you want to have DSL internet settings for your device then you will need these settings for your device. You can configure ADSL settings for your devices using Netgear genie application that can be used for all Android and iOS devices.

Follow These Steps to Make ADSL Settings for Netgear Router Devices

1.     Find what kind of internet connections you are using and also get VPI and VCI details for your device.

2.     Access Netgear router login page from your computer device.

3.     Fill Netgear login user name and password.

4.     Click on “Setup” button and then select “Basic Settings” button.

5.     Select the type of internet connections you are using for your Netgear device. Your internet service provider will help you to get know about the type of connections you are using.

6.     Once again fill the login details for your devices.

7.     Select option that you want to get internet service providers dynamically.

8.     At next page you will need to fill DNS address and click on “Apply” button.

9.     You can then configure the ADSL settings from your next window. See the details of the Linksys setup for disabling the SSID for linksys

10.                    Select the multiplexing method and then you can fill VPI and VCI details for your device.

11.                    Once again click on “Apply” button.

These are steps to make ADSL settings for your Netgear wifi router devices. You can also power cycle your device once you did with these routerlogin net start192.168.1.1 settings. When you remove power supply for your device for sew seconds, this is known as power cycling your devices.  

Video streaming from Samsung SmartCam Devices

Samsung SmartCam devices are installed to your home so that you can easily secure all your corners at your home. There are many Samsung SmartCam devices that you can choose for your security and some of these devices are given in following list.

·        Samsung SmartCam SNH-P6410BN

·        Samsung SNH-V6410PN SmartCam Pan/Tilt Full HD 1080p Wi-Fi IP Camera

·        Samsung SNH-V6410PN Samsung SmartCam login Pan/Tilt Full HD 1080p Wi-Fi IP Camera Bundle Double Pack

·        Samsung A1 Indoor SmartCam

·        Samsung SmartCam IP Camera SNH-1011

Do not get confuse with all these camera devices because you can get best camera devices for your home just by getting the features of all devices.

Live Monitoring from Samsung SmartCam Devices

When you select Samsung camera that is best for you, you are ready to setup your device. You can easily configure your Samsung SmartCam devices from your mobile devices. Go and check for the time settings for the Samsun smartcam setup.

Using “Live Monitoring Feature” for these Samsung cameras, you can watch live videos from your mobile device. You will get the live coverage of videos that your camera devices are recording. You can easily store all these videos to a remote account and access these videos whenever you need using Samsung SmartCam login page.

Two way communication methods is also very useful feature of these camera devices. When you are not at home and you want to talk to your family then you can talk to them using two way communication features. For this features you can use Samsung SmartCam mobile application.